Mainline Submarine Hose With Location Collars

Get moving with Mainline Submarine Hose With Location Collars.

1. Connecting sea chest and buoy on buoy system;

2. Rated working pressure: 21 bar;

3. Minimum reserve buoyance: 20% or according to customer requirements;

4. Electrical continuity: electrical continuous or discontinuous;

5. Leak detection system: after the failure of the primary carcass, the detector will react to the leakage to remind the operator to remove the damaged hose to avoid economic loss and environmental pollution;

6. Cover: PU or rubber.

Specifications can be designed by customer requirements.

Mainline Submarine Hose With Location Collars Main Carcass:

• Main Lining / Inner Tube: Smooth, oil and fuel resistant Pure Seamless and Extruded Acrylonitrile-Butadiene-Rubber (NBR);
• Safety Lining: special construction to prevent defects or damage caused by incidental tearing or superficial damage of the main lining;
• Reinforcements: Multiple Plies of High Tensile Textile cord. One embedded helical Body Steel wire.
• Single Carcass And Double Carcass

Mainline Submarine Hose With Location Collars Outer Cover:

• Smooth black, Synthetic Rubber Resistant to Abrasion, Oil, Sea Water, and Sunlight.
• Polyurethane Orange in Colour cover available on request.

Fittings: End connections built-in during manufacture. ASME B 16.5 Class 150lb or 300lb Weld Neck Flat Face or Raised Face on request.

Hose Tests: All tests according to GEPHOM 2009 and Customer detail.